For small CCTV installations employing PoE the FSD-804P is a highly economical PoE dual mode device that acts both as a switcher and a PoE injector. Able to provide Power over Ethernet for up to four (4) indepenant PoE cameras of PoE Splitters (POE-151S-5V/9V/12V) theis product is a simple and practical way of providing power distribution to cameras, thus avoiding the installation of local mains power outlets

Half of the 10/100Mbps TP ports of FSD-804PS provide PoE power injector function which is able to drive 4 IEEE802.3af compliant powered devices.

For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.

Key Benefits:

• Reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.
• Lowe the installation costs
• Simplifys the installation effort
• Eliminates need for electricians or extension cords.
• More efficient than 4 linear power adapters in a long run

Key Features

• 8-Port 10/100Mbps Fast Ethernet ports
• 4-Port support 48VDC power to PoE Powered Device.
• Hardware based 10/100Mbps auto-negotiation.
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, support 2K absolute MAC addresses Automatic address learning and address aging
• Supports Auto MDI/MDI-X function
• LED indicators for easy network diagnostic
• Web/Console management
• VLAN for network segregation
• Port trunk bandwidth aggregation
• Per port High/Low transmission priority configuration
• PoE power Disable/Enable by management interface
• PoE power consumption monitoring
• Ethernet standards comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3x Flow Control and IEEE802.3af Power over Ethernet.
• EMI standards comply with FCC, CE class A.
  
  

Specification

• Network Connector - 8-Port RJ-45 for 10/100TX, 4-Port with PoE injector function
• LED Display - One power, 1-4 port PoE in-use, LNK/ACT, 100, 5-8 port LNK/ACT, 100
• Switch architecture - Store and forward switch architecture. Back-plan up to 1.6Gbps
• MAC address - 2K MAC address table with Auto learning function
• Remote power feeding - End-point insert type and compatible with IEEE802.3af,
  Per port feeding power: 15.4Watts (maximum)
• Management - Web/Console management
• VLAN - Port-Based VLAN, up to 8 groups
• Port priority - High/Low
• Storm Control - Disable, 10%, 20%, 40% 4 levels
• Port Trunk - Port #7 and #8, fixed
• PoE power control - Power provision Enable/Disable, priority configuration
• Power - AC 100~240V, 50/60Hz, Max. 45 watts power consumption
• Operating environment - 0~40 Degree C, 10%~95%RH
• Storage environment - -40 ~70 Degree C, 95% RH
• Dimension (W x D x H) 217 x 135 x 43 mm
• EMI - FCC Class A, CE
• Standard Compliance - IEEE 802.3 Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.3af Power over Ethernet