BLWV10

Panasonic Wired/Wireless Camera Monitoring System (BL-WV10)

Camera Image Monitoring
Simply connect the BL-WV10 to your Panasonic home network cameras (sold separately) and to your TV, and you'll be able to view camera images conveniently on your TV. Wireless cameras such as the BL-C30A can be connected as well, meaning you won't have to worry about running cables from the BL-WV10 to each camera..

Pan/Tilt Feature
Aim the camera wherever you want by simply pressing the navigator keys on the included remote control.

Sensor Alert Feature
The camera's built-in sensor detects motion by sensing temperature changes caused naturally by people or animals moving within the sensor's range. When the sensor detects motion, the BL-WV10 can alert you by sounding its built-in buzzer and by displaying the image from the camera that has detected motion. This feature is not available with HCM series cameras.

Camera Image Recording
Simply insert an optional SD memory card and you'll be able to record movies and pictures of your camera images. Later you can use the remote control to play back movies and view pictures on your TV that were recorded by the BL-WV10.

System Expansion
Up to 8 cameras can be connected, allowing you to keep an eye on every room with just 1 BL-WV10.

Multi-Camera Monitoring
When multiple cameras are registered, you can view up to 4 camera images at once and switch to monitor a specific camera if necessary.

Quick Setup
Configuration is quick and easy with the BL-WV10's Quick Setup feature–connect your cameras to the BL-WV10 and Quick Setup will handle the rest.

Note Recommended Accessories (sold separately) Compatible router:
• Panasonic BB-HGW700A Network Camera Management System
Compatible Network Cameras:
• Panasonic BL-C10A, BL-C30A (firmware version 1.22 or higher)
• HCM series (firmware version 1.08 or higher, however, some features cannot be used).

The following HCM series cameras are not supported by the BL-WV10A:
- KX-HCM8
- KX-HCM10
- KX-HCM230
- KX-HCM250
- KX-HCM270
- KX-HCM280A computer network limited to the immediate area, usually the same building or floor of a building. LAN IP addresses, a.k.a "local IP address" typically begin with 192.168.xxx.xxx.
For the latest firmware, visit http://panasonic.co.jp/pcc/products/en/netwkcam/ This product can send an E-mail to your PC or mobile phone, if a camera disconnection is detected.

Features & Specification

Add to wishlist

BLC30QUAD

Panasonic 4 Wireless Network Camera Recording System (BLC30 & WV10)

System Includes:
x 4 Panasonic BLC30 wireless cameras
x 1 BL-WV10 monitoring system

CAMERAS:

• High Resolution internal colour CMOS camera
• Built-in web server - no PC required!
• WEP Security (64/128/152 bit), SSID, TKIP/AES • Pan and Tilt lens which can be controlled from a remote location via a PC or mobile telephone
• Built-in motion detection sensor
• Email alert with snapshot image when motion is detected
• Automatic set up of FREE IP address
• Colour night view mode - 1 lux (suitable for very low lighting conditions)
• Max Resolution 640 x 480 pixels
• Privacy mode
• Up to 20 people can simultaneously access cameras remotely

Package Contents

• Panasonic BLC30 Camera
• 3m AC Power Adaptor
• 1.8m AC Cord
• Setup CD (Operating Instructions, Installation/ Troubleshooting, Getting Started, Setup Program, Network Camera Recorder Trial Version)
• 2 Screws+2 Washers for Fastening
• Printed Installation/Troubleshooting Guide
• Printed Getting Started Manual

Pan/Tilt Feature
Aim the camera wherever you want by simply pressing the navigator keys on the included remote control.

Sensor Alert Feature
The camera's built-in sensor detects motion by sensing temperature changes caused naturally by people or animals moving within the sensor's range. When the sensor detects motion, the BL-WV10 can alert you by sounding its built-in buzzer and by displaying the image from the camera that has detected motion. This feature is not available with HCM series cameras.

Camera Image Recording
Simply insert an optional SD memory card and you'll be able to record movies and pictures of your camera images. Later you can use the remote control to play back movies and view pictures on your TV that were recorded by the BL-WV10.

System Expansion
Up to 8 cameras can be connected, allowing you to keep an eye on every room with just 1 BL-WV10.

Multi-Camera Monitoring
When multiple cameras are registered, you can view up to 4 camera images at once and switch to monitor a specific camera if necessary.

Quick Setup
Configuration is quick and easy with the BL-WV10's Quick Setup feature–connect your cameras to the BL-WV10 and Quick Setup will handle the rest.

Features & Specification

Add to wishlist