Installation made simple with this POE (Power over Ethernet) compatible camera, which mean camera power can be supplied by simply connecting a LAN cable; The incorporated composite video output allow you to connect the camera to a monitor or TV so you could easily check the camera viewing angle whilst installing.

To bring out the best of the picture quality and the auto iris control feature of the Panasonic WV-NP240 IP camera, remember to include the optional Panasonic auto iris control lens into your basket:

Features Summary:

• Dual MPEG-4 and JPEG digital signal output for simultaneous live monitoring and high resolution recording
• Progressive scan type CCD image sensor for outstanding image and colour quality in high resolution
• The high sensitivity built-in microphone provide crisp and clear audio monitoring via network.
• Image refresh rate: 0.1 fps - 30 fps (VGA resolution) – full-rate real time monitoring make sure that you do not miss any decisive movements
• Built-in network interface and web server for easy setup and remote monitoring via PC
• Multi-screen display which enable 8 cameras to be monitored using a single web browser (no software installation is required)
• User configurable video motion detection that send out email or upload image to ftp server, when motion is trigger on the camera scene.
• Ability to connect to external alarm and sensor device for added security.
• Built-in SD Memory Card slot for FTP backup
• Built-in electronic zoom function (1x, 1.5x, 2x, 2.5x and 3x) allow you to view subjects’ up-close

Panasonic WV-NP240 Specifications:

General

Ambient operating Temp. : -10 degree - +50 degree

Ambient operating Humidity: Less than 90%

Power over Ethernet: Yes (IEEE802.3af)

Power Source: 220 V - 240V 50Hz or PoE (48 V DC)

Power Consumption: 5.0W (220 V - 240V 50Hz) or PoE (4.2 W)

Dimensions (without lens): 72 (W) x 65 (H) x 158 (D) mm

Weight (approx): 470g

Network Section:

Network: 10Base-T / 10Base-TX, RJ45 connector

Image Resolution (JPEG): VGA (640 x 480), QVGA (320 x 240) max. 30fps

Image Resolution (MPEG-4): VGA (640 x 480), QVGA (320 x 240) max. 30fps

Image Compression (JPEG): JPEG 10 level adjustment, Pull/Push mode

Image Compression (MPEG-4): Image Quality / Normal / Moving Image; selectable, unicast / multicast

Image Refreshing Rate: 0.1 fps ~ 30fps

Traffic Control: 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 and Unlimited

Protocol Supported: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP and SNMP

OS Applicable: Windows2000 Professional SP4, Windows XP Home/ Professional SP2

Browser Applicable: Internet Explorer 6.0 Service Pack2

Camera Section

Pick-up Device: Progressive scan type CCD image sensor

Scanning Area: 5.79 (H) x 4.89 (V)

Video Output: VBS 1.0 V [p-p] / 75Ω, composite signal, 3.5mm mini jack

FTP Client: Alarm image transfer, FTP periodic transfer

Multi Screen: * screens (4 screens x 2 groups)

SD Memory Card (optional): 64MB, 128MB, 256MB, 512MB and 1GB by Panasonic SD Memory card

Motion Detector: ON / OFF

Minimum Illumination: 1.1 lux colour imaging at optional F1.2 lens, i.5 lux colour imaging at optional F1.4 lens

Automatic Gain Control: ON (always)

White Balance: Auto / Hold

Zoom: 1x, 1.5x, 2x, 2.5x, 3x

Sense UP: OFF, Auto (x2, x4, x6, x10), FIX (x2, x4, x6, x10, x16, x32)

Shutter: AUTO

Electronic Light Control: 1/50(OFF), 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 s selectable

Lens Mount: CS-Mount

ALC Lens: DC servo

External Input Terminals: Alarm input/output, AUX output