The Panasonics HCM511 Pan/tilt IP camera with 10x Digital zoom give you more control and is capable of monitoring a larger area. It comes with the enhanced CCD imgae sensor which ensures natural colour and sharp images, as well as monitoring at low light condition with its colour night view mode.

With Panasonics HCM511 you are buying an IP camera that serves multiple applications:

• IP CCTV camera for security surveillance (FREE Pansonic recording software included)
• IP DVR that record images directly onto an SD memory card (SD card sold separately )
• IP walkie-talkie, 2-way remote communication (require amplified speaker to connect to the camera)
• IP PTZ remote pan, tilt and zoom (10x digital) even when you are away from the camera
• IP sensor alarm with its built-in motion detection or external sensor (sold separately) will trigger the camera to send alarm notification by email, ftp or even an external alarm device (sold separately)
• IP central monitoring the camera web browser interface can display up to 12 cameras simultaneously on one screen, no software installation is required
• Smart Digital camera that will take mulitple snap shot on the observed object (constructions, laboratory experiment, wildlife, etc.) according to user configured built in calendar timer.

Features summary:

• IPv6 compatible Network Camera
• Audio 2-way Communication(Walkie-talkie Type)
• Better Image Quality with enhanced CCD sensor
• Various Camera Control Features
• SD Memory Card Recording
• Enhanced Multi-Camera Page for viewing up to 12 cameras on one screen.
• Supporting Viewnetcam.com service for your free DDNS domain name (personal website)
• Multi-Language Display

Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. Since the camera also supports IPv4 that is currently used, it is "dual stack" design will seamlessly operate while IPv6 is phased in. For more information in IPv6 you wish to visit http://www.ipv6.org/. See page 13 for more information.

Audio 2-way Communication(*2 )(Walkie-talkie Type) (IPv4/v6)

Your Panasonic Network Camera now provides 2-way audio, between the camera and your PC. You will be able to hear the person on camera and respond using a microphone connected to your PCs sound card (customer-provided.) They will hear your response through the amplified speaker (customer-provided) connected to the camera. The audio feature uses a Java applet that is installed during the installation procedure.

For example, the camera can be used in the following various locations:
- In the babys room, to hear if the baby is crying.
- At the front door, to see and hear who is at the door.
- In the childrens play room, to see and hear if they are safe.

Note
PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in compliance with all applicable federal, state and local statutes.

Better Image Quality

The CCD sensor and the colour night view mode provides better image quality and low light performance.
- The CCD sensor gives you clear image.
- You can monitor live video (Motion JPEG) that refreshes its image 30 frames per second.
- Colour night view mode allows you to monitor the camera in low illuminance.
Various Camera Control Features

The camera pans or tilts fast in maximum 80 ° per second. (The previous model: 21 ° per second) You can control the camera at high speed from your PC or mobile phone. Alarm position feature also allows the camera to automatically turn the lens to the alarm position. Additionally, the following control features are available to easily and quickly monitor the camera.

Click to Centre
When you click a certain point on the camera image, the point is centred on the image.

Preset Position
You can register 8 preset positions. When you click each button, the image switches to its position.

Output Control
You can control the external devices (Open or Short to GND) (E.g., turning the light on or ringing a buzzer).

SD Memory Card (*3 ) Recording

The camera has an SD memory card slot. You can record camera images to the SD memory card. If you enable alarm buffer/transfer, you can record the image at the timing of signal detection of door sensor or light. About 58,000 images (320 x 240 resolution and standard quality) can be recorded to 1 GB SD memory card. If you enable 1-minute interval timer buffer/transfer, you can record the images for about 42 days.

Enhanced Multi-Camera Page

Multi-Camera page displays up to 4 cameras while supporting each audio 2-way communication. The previous model displays only 4 cameras, but this camera can switch 3 sets of 4 cameras. Additionally, the camera can displays maximum 12 cameras on a page in a static image.

Supporting Viewnetcam.com service

Viewnetcam.com service allows you to access the camera over the Internet with your favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP address. For more information on Viewnetcam.com service, Please access www.viewnetcam.com for more information.

Multi-Language Display

Top page, Single Camera and Multi-Camera page can be displayed in English, French, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. The Setup, Maintenance and Support pages are displayed only in English or Japanese.

(*1) To connect in IPv6, subscribe to the ISPs IPv4/IPv6 Dual-Stack or IPv6 over IPv4 Tunneling service. The camera does not work in IPv6-only network. (*2) Audio feature does not work on mobile phones. Talk button and Listen button cannot be used simultaneously. In IPv6, the audio feature does not work. It will be supported by the firmware update in the future. In consequence of traffic and network environments, the audio may be delayed or may break up.

(*3) SD memory card is sold separately. The camera supports 64 MB, 128 MB, 256 MB, 512 MB or 1 GB SD memory card.   
  

Accessories